Land Use Bylaw1P2007

Bylaw test

Top of page

Size Restrictions for Projecting Signs

102 1 In the C-N1, C-N2, C-C1, CC-EIR, CC-EMU, CC-EPR, CC-MH, CC-MHX, M-H1, M-H2, M-H3, M-X1 and M-X2 Districts, the maximum sign area for a Projecting Sign is 2.3 square metres.
35P2011, 13P2017
2 In the C-COR3 District, the maximum sign area for a Projecting Sign is 9.3 square metres.
3 In all other commercial districts, in all industrial and mixed use districts and in the CC-ET and CR20-C20/R20 Districts the maximum sign area for a Projecting Sign is 4.5 square metres.
33P2013, 13P2017, 20P2017
4 In all other Districts not referenced in subsections (1) through (3), the maximum sign area for a Projecting Sign is 1.0 square metres.
5 In the Stephen Avenue Mall heritage area, a Projecting Sign:
15P2014
a must not have a dimension greater than 0.91 metres by 1.22 metres except where the only other sign on the façade of the building is a Window Sign; and
b when located above the designated signable area referenced in section 92(2) and (5) must not have a:
i sign area greater than 1.1 square metres;
ii vertical dimension greater than 1.2 metres; and
iii horizontal dimension that is parallel to the building façade greater than 0.20 metres.

DISCLAIMER: This version of Bylaw 1P2007 MUST NOT be relied upon; it is not an official version of the bylaw and may contain errors. The City of Calgary accepts no responsibility to persons relying solely on this information. Consult the Office of the City Clerk for an official version of the bylaw, if required. Please note that web pages are updated periodically.