Bylaw test
Top of page
Temporary Sign
89
1
A Temporary Sign must not be located on any parcel such that the copy on the sign is visible from:
2
A Temporary Sign must not be placed on a parcel that is located in the following pedestrian corridors:
2.1
A Temporary Sign must not be placed on a parcel where an approved Digital Message Sign is operating.
3
A Temporary Sign must be stabilized and anchored in a way that ensures it will not be unintentionally moved, blown over or dislocated.
4
Sandbags and guy wires may only be used to stabilize or anchor a Temporary Sign if the sign is located on a hard surface.
a
1.0 square metre if a Dwelling Unit is located on the parcel where the Temporary Sign is located; and
b
3.0 square metres if there are no Dwelling Units located on the parcel where the Temporary Sign is located, with the exception of election signs.
7
In all other Districts not addressed by subsection (6), the maximum sign area of a Temporary Sign is:
a
1.5 square metres if the frontage of the parcel where the Temporary Sign is located is 30.0 metres or less; and
b
5.5 square metres if the frontage of the parcel where the Temporary Sign is located is greater than 30.0 metres.
b
2.0 metres if the sign area is greater than 2.5 square metres, but less than 3.0 square metres; and
9
A Temporary Sign with a sign area greater than 1.5 square metres must be located on a Temporary Sign Marker that has been approved in accordance with the rules for Sign — Class E and must:
10
Unless otherwise referenced in subsection (11) a maximum of one Temporary Sign may be located on a parcel.
b
greater than 75.0 metres, but less than or equal to 200.0 metres, a maximum of two Temporary Signs may be located on that parcel; and