IFTP Call for designs
Submitting a design
Designs can be submitted starting on April 1, 2025 at midnight, and must be received not later than April 15, 2025, 11:59 pm.
Before submitting a design, please ensure that you comply to the following:
- Submit a complete application as per the IFTP Design Submission Requirement List.
- You own the copyrights for the designs you submit.
- Agree to the Application Requirements Legal Acknowledgement.
- Submit one design that meets all of the minimum building design criteria. One design is permitted per applicant/Designer in only one of the approved typologies.
- Review your designs and choose the one that meets the minimum requirements while also considering the Infill Fast Track Program 1.0 Design Evaluation Criteria for an added advantage.
- Send your design and the required information via email to InfillFastTrack@calgary.ca.
Please note: Our system has email size restrictions (20MB), email if less than 20 MB and/or contact us via email to set up a OneDrive link.
Minimum building design criteria
Applicant eligibility
- This call out is open to anyone who submits a design that meets the minimum design criteria. This application is not a procurement or a design competition.
The designs that you submit must meet the following requirements:
Permits
- The design must have been approved and released at least once within a developed community in the City of Calgary boundary. The relevant Development Permit (DP) and Building Permit (BP) numbers and address must be provided. It is beneficial if Development Completion Permit and Building Permit occupancy is issued on your example development.
- Development Permit meets all rules of the R-CG district of the Land Use Bylaw 1P2007 with no Bylaw discrepancies and have no issues with field inspections (if DCP is issued).
- The building permit meets the prescriptive requirements of the National Building Code, Alberta Edition, has no alternative solutions, and had minimal issues on plans examination and field inspections.
- Must include two (2)-unit semi-detached (with two (2) secondary suites) and two (2) backyard suites, four (4)-unit townhouse (with a minimum of two (2) secondary suites), and four (4)-unit corner rowhouse (with a minimum of two (2) secondary suites
- The site design will require to have on one side, adjacent from the property line, a 1.2m walkway width minimum. The material for the walkway is to the discretion of the designer, with pavers being an option if preferred.
*Please note the DP and BP plans must be the same, only with the addition of site-specific details and colour and comparable material changes that do not require any new Land Use Bylaw check or Building Code review may be permitted.
Lot and slope requirements
- Design must fit a single lot (50’ x 120’).
- Designed for Lane access.
- The lot must accommodate a slope no greater than 6%.
- Site Design must not require retaining walls.
- Must be designed to have access to all three (3) deep utility services (Storm, sanitary, and water).
- Must not be designed to be located on a Main Street or a street with a public realm setback.
Infill Fast Track Program 1.0 Typologies
The Catalogue will be for infill Residential Contextual Grade Oriented R-CG zoned sites. Typologies that will be displayed in the first Catalogue publication will be: two (2)-unit semi-detached (with two (2) secondary suites) and two (2) backyard suites, four (4)-unit townhouse (with a minimum of two (2) secondary suites), and four (4)-unit corner rowhouse (with a minimum of two (2) secondary suites). After determining the success of this program, we hope to explore ways to include more typologies to the program in the future.
Two-unit semi-detached (with two (2) secondary suites and two (2) backyard suites)

Four-unit townhouse (with a minimum of two (2) secondary suites)

Four-unit rowhouse (with a minimum of two (2) secondary suites)

Contact us
For more information, please email InfillFastTrack@calgary.ca.
Stay connected
Sign up for email updates to receive news and notices related to this initiative.